User`s guide

SpeedStream Wireless DSL Gateway Computer Configuration

4. The “Configure Time Zone” window allows you to set the time zone of the area of the world in which

you live. Select the “Yes” option from under the “Enable Time Client” heading.

5. Select your time zone from the “Select Time Zone” drop-down and click Next.

Figure 16. Setup Wizard Time Zone Window

6. The Wireless Setup Configuration window allows you to set up wireless clients on your gateway.

Select the “Enable” option under the “Wireless Interface” heading to setup the wireless part of the

Gateway. Select the “Disable” option if you do not wish to setup the wireless portion of the Gateway.

Note: If you select the “Disable” option and click Next, the system responds with the “Finish”

window.

7. Type your wireless network ID in the “SSID” (Service Set Identifier) box. This value is the name of

your network.

8. Optionally, select a channel from the “Channel” drop-down. The channel is a path of

communication that is used across your network. Note: Depending on your area and gateway

configuration, the channel may default to only one value.