Specifications

Efficient Networks, Inc. Installation Instructions 5
Hardware
Installation
Installation Instructions
NOTE: The labels for the back panel of the modem are located on the
underside of the unit.
1
Connect the power cable to the power connector on the back of the
modem; then connect it to a power outlet.
2 Locate the ferrite choke and open it by pulling up on the lip on the
non-hinged side. Attach the choke to the USB cable (marked with this
symbol: ) as shown in the figure below.
USB Port
Power
Connector
DSL
Port
Your power
adapter may
be different
than the one
shown
Power
Outlet
Ferrite Choke
Open
Here by
Pulling out
on Lip
Attach choke by looping
USB cable and clipping it
on the doubled strand.
Attach as close as possible
to modem-end of USB cable.