Specifications

10 PPP Driver Installation Efficient Networks, Inc.
3-b Click Next on the Add New Hardware Wizard dialog box.
4 The next dialog box states that “Windows is now ready to install the
best driver for this device.” Click
Next. Windows will then copy the
driver files from your CD-ROM.
As the files are being copied, you may be prompted for the Windows
98 CD. If so, insert the CD and click
OK.
5 Next you may see the Insert Disk dialog box. Click OK.
6 On the Copying Files dialog box, pull down the “Copy files from:”
list and select
<drive>: W98. Click OK.
7 Click Finish on the Add New Hardware Wizard.
8 At this point, you will be asked to restart Windows. Click Yes to
restart the PC.
9 When Windows comes back up, a series of configuration dialog boxes
will be presented. Use your service provider’s instructions to set the
parameters.
• When the
Connections dialog box appears, highlight the
connection (if shown) and click
Modify. Enter the VC number
specified by your service provider.
• If no connection is listed, then click the
Add button and enter a
specific name for the connection along with the VPI and VCI
settings as specified by your service provider. Click
OK when you
are finished.
• Click
Next.
10 Click the Finish button to complete the configuration.
11 When the driver installation is complete, set up your dial-up
connection as described in the next section.