Product specifications

Chapter 4: System Commands Efficient Networks
®
Router family
Command Line Interface Guide
Page 4-20 Efficient Networks
®
The following command clears all addresses from the list.
Response
Command prompt.
system backup disable
Disables the Dial Backup option in the router.
NOTE:
Because Dial Backup uses the console port, you cannot access the command line via
the console port while Dial Backup is enabled. You must use the Web GUI interface or
a Telnet session to disable Dial Backup.
NOTE:
If you do not use the save command to save this change, Dial Backup is only
temporarily disabled and it is re-enabled at the next reboot. Temporarily disabling Dial
Backup stops Dial Backup, but it does not change the use of the console port. To
disable Dial Backup across reboots, see ”Disabling and Re-Enabling Dial Backup” on
page 6-15 of the Technical Reference Guide.
To re-enable the Dial Backup option, use the system backup enable command. For
more information about Dial Backup, refer to ”Dial Backup” on page 6-7 of the
Technical Reference Guide.
Mgmt Class
Network (R/W)
Input Format
system backup disable
Parameters
None
Response
Command prompt.
-> system backup delete all all