Product specifications

Chapter 4: System Commands Efficient Networks
®
Router family
Command Line Interface Guide
Page 4-2 Efficient Networks
®
system addhttpfilter Enables blocking all devices except those within
the defined IP address range from using the HTTP
protocol
system addiproutingtable Defines a new virtual routing table.
system addserver Configures a local IP address as the selected serv-
er on the LAN (FTP, SMTP, etc.) for the global con-
figuration.
system addsnmpfilter Validates SNMP clients by defining a range of IP
addresses that are allowed to access the router via
SNMP.
system addsyslogfilter Limits the Syslog server addresses that may be re-
turned by DHCP.
system addsyslogserver Adds an address to the list of Syslog servers.
system addtelnetfilter Validates Telnet clients by defining a range of IP
addresses that are allowed to access the router via
Telnet.
system addudprelay Create a UDP port range for packet forwarding.
system authen Forces the target router authentication protocol
that is used for security negotiation with the remote
routers when the local side authentication is set.
system backup add Adds an IP address to the list of addresses to be
pinged for the Dial Backup option.
system backup delete Deletes an IP address from the list of addresses to
be pinged for the Dial Backup option.
system backup disable Disables the Dial Backup option in the router.
system backup enable Enables the Dial Backup option in the router.
system backup pinginterval Changes the ping interval for a group, that is, the
number of seconds between pings during a test of
the addresses in the group.
system backup pingsamples Changes the number of ping samples for a group,
that is, the number of pings performed for each ad-
dress in the group.
system backup retry Changes the Dial Backup retry period.
system backup stability Changes the Dial Backup stability period.
Table 4-1: System Command Listing (Cont.)
Command Function