Product specifications

Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 2: Status Commands
Efficient Networks
®
Page 2-27
sntp server
Displays or changes the SNTP server list.
• To see the current SNTP server list, specify sntp server with no parameter.
• To specify the default server list, specify sntp server default.
• To add a server to the list, specify sntp server with the server IP address and
a new number for the entry.
• To change the address of a server, specify sntp server with the server IP
address and the existing entry number.
• To remove a server from the list, specify sntp server 0.0.0.0 and the number
of the server to be removed.
NOTE:
To make a change permanent, you must save the change before you reboot.
Mgmt Class
Admin (R/W)
Input Format
sntp server <ipaddress> | default [<number>]
Parameters
Response
When entered with the <default> parameter:
<ipaddress>
a
a
Dotted-decimal notation
IP address of an SNTP server.
b
b
To remove a server, specify 0.0.0.0 as the IP address.
default
Requests the default server list.
<number>
c
c
Integer
Number of the server in the list. If that server number is already in the
list, the IP address is changed; otherwise, a new entry is added to the
list. If you omit a number, the IP address of the active server is changed.
-> sntp server default
Current server (1) IP addr: 192.5.41.40
Current server (2) IP addr: 192.6.38.127
Current server (3) IP addr: 209.81.9.7
Current server (4) IP addr: 129.7.1.66
Current server (5) IP addr: 192.168.254.2