Product specifications

Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 2: Status Commands
Efficient Networks
®
Page 2-25
Response
sntp prefserver
Displays or changes the preferred SNTP server. (The preferred server is the server
that should be attempted first when a request is made.)
To specify a server preference, specify the number of the preferred server within the
SNTP server list. To see the SNTP server list, enter sntp server.
To see the active SNTP server (that is, the server that last responded to an SNTP
request), use the command sntp active.
NOTE:
To make this change permanent, a save must be performed before a reboot.
Mgmt Class
Admin (R/W)
Input Format
sntp prefserver <number>
Parameters
Response
When entered with no <number> parameter:
-> sntp offset
Current offset from UTC is 0 minutes
Use <system sntp offset> to set time zone
usage: sntp offset <Minutes from UTC>
(offset is negative for west, positive for east of Greenwich meridian)
-> sntp offset -360
***
When no parameter is entered, current preferred server displayed.
<number>
a
a
Integer
Number of a server within the SNTP server list.
-> sntp prefserver
The preferred SNTP server is 1 (192.6.38.127)