Product specifications

Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 17: SNMP Commands
Efficient Networks
®
Page 17-1
CHAPTER 17
CHAPTER 17 SNMP COMMANDS
This section contains SNMP command descriptions. For a complete discussion of
SNMP, see “SNMP” on page 7-2.
The SNMP commands found in this section include:
Table 17-1: SNMP Command Listing
Command Function
snmp ?
Lists the supported SNMP keywords and com-
mands.
snmp addsnmpfilter Validates SNMP clients by defining a range of IP
addresses that are allowed to access the router via
SNMP. Same function as
system addsnmpfilter.
snmp addtrapdest Adds an SNMP Trap manager by IP address.
snmp community Sets the SNMP community to which the router be-
longs.
snmp delsnmpfilter Deletes the specified SNMP client range. Same
function as
system delsnmpfilter.
snmp deltrapdest Deletes a SNMP Trap manager by IP address.
snmp disablesnmpif
Disables SNMP access from the specified inter-
face.
snmp enablesnmpif Enables SNMP access from the specified inter-
face.
snmp settrapenable Enables or disables transmission of unsolicited
trap event messages to trap destinations.
snmp snmppasswd Sets an authentication password for an SNMP
Manager.
snmp snmpport
Manages SNMP port access. Same function as
system snmpport.