Product specifications

Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 12: IKE/IPsec Commands
Efficient Networks
®
Page 12-3
ike peers list
Lists the defined IKE peers.
ike peers set address Sets the IP address of the other endpoint of the se-
cure IKE peer connection.
ike peers set localid Sets the local ID for the IKE peer connection.
ike peers set localidtype Sets the type of the local ID for the IKE peer con-
nection.
ike peers set mode Sets the IKE peer connection mode to either main
mode or aggressive mode.
ike peers set peerid Sets the peer ID for the IKE peer connection.
ike peers set peeridtype Sets the type of the peer ID for the IKE peer con-
nection.
ike peers set secret Sets the shared secret for the IKE peer connection.
ike proposals add Defines the name of a new IKE proposal.
ike proposals delete Deletes an existing IKE proposal.
ike proposals list Lists the IKE proposals.
ike proposals set dh_group Sets the IKE proposal parameter that specifies the
Diffie-Hellman (DH) key generation group used (no
group or group 1 or 2).
ike proposals set encryp-
tion
Sets the IKE proposal parameter that requests
ESP encryption and specifies the encryption meth-
od used.
ike proposals set lifetime Sets the IKE proposal parameter that specifies the
length of time (in seconds) before the Phase 1 Se-
curity Authentication (SA) expires.
ike proposals set
message_auth
Sets the IKE proposal parameter that specifies the
message authentication done.
ike proposals set
session_auth
Sets the IKE proposal parameter that specifies the
session authentication; pre-shared key is currently
the only option.
ipsec add Defines an IPSec security association (SA) name.
ipsec delete Deletes an existing IPSec security association
(SA) name.
ipsec disable Disables a defined IPSec security association (SA)
entry.
Table 12-1: Internet Key Exchange Command Listing (Cont.)
Command Function