Product specifications

Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 9: L2TP Commands
Efficient Networks
®
Page 9-1
CHAPTER 9
CHAPTER 9 L2TP COMMANDS
This section contains L2TP command descriptions. For a complete discussion of
L2TP tunneling, see “L2TP Tunneling — Virtual Dial-Up” on page 6-26 of the
Technical Reference Guide. The L2TP commands allow you to:
• Add, delete, and modify tunnels
• Configure L2TP router information including:
• Names
• Security authentication protocols and passwords
• Addresses
• Management of traffic performance
• Restrict a tunnel so it can be established only with a specific remote interface
(l2tp set wanif).
The L2TP commands found in this section include:
Table 9-1: L2TP Command Listing
Command Function
l2tp ?
Lists the supported L2TP keywords.
l2tp add Creates a tunnel entry.
l2tp call Establishes a tunnel without creating a session.
l2tp close Closes an L2TP tunnel and/or session.
l2tp del Selects adaptive or fixed rate mode.
l2tp forward Configures the router to forward all incoming calls
to an LNS without answering the incoming call.
l2tp list Display of the current configuration settings for tun-
nel(s), except for the authentication password/se-
cret.