Product specifications

Chapter 7: WAN Interface Commands Efficient Networks
®
Router family
Command Line Interface Guide
Page 7-26 Efficient Networks
®
Parameters
Response
Command prompt:
hdsl terminal
The router is by default configured as the Customer Premises Equipment (CPE). Use
this command if you intend to configure the router as the Central Office equipment
(CO).
•
hdsl terminal cpe defines the CPE end (default configuration)
•
hdsl terminal co defines the CO end.
•
hdsl terminal displays the current settings.
Mgmt Class
Network (R/W)
Input Format
hdsl terminal [cpe | co]
Parameters
Response
Command example displaying current mode:
***
When entered with no parameters, the current speed is dispaly-
ed.
a
a
Available only if the modem has activated successfully.
384
Authorized non-default speed for the CO in Mbps.
1168
Authorized non-default speed for the CO in Mbps.
noauto
b
b
hdsl speed noauto should be followed by the command hdsl save to be persistent across restarts
and reboots.
Used to override auto-speed on the CPE.
***
When entered with no parameters, the current mode is displayed.
cpe
Sets the terminal operation mode to CPE.
co
Sets the terminal operation mode to CO.
-> hdsl terminal
Customer Premise