Product specifications

Chapter 6: Remote Commands Efficient Networks
®
Router family
Command Line Interface Guide
Page 6-52 Efficient Networks
®
NOTE:
To use the management address as the source address for a ping, you must specify it
using the -I option on the ping command. For example, to use management address
192.168.1.2 when pinging destination address 192.168.100.100, specify:
ping -I 192.168.1.2 192.168.100.100
NOTE:
To use the management address as the source address for a copy, you must specify
both the source and destination addresses on the copy command.
To list the current management address for the remote router, if any, use the remote
list. To set a management address for an Ethernet interface, see eth ip mgmt.
Mgmt Class
Network (R/W)
Input Format
remote setmgmtipaddr <ipaddr> <mask> <remotename>
Parameters
Response
Command prompt.
<ipaddr>
a
a
Dotted-decimal notation
IP address.
<mask>
a
IP sub-network mask.
<remotename>
b
b
ASCII string
Name of the remote router.