Product specifications

Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 5: Ethernet Interface Commands
Efficient Networks
®
Page 5-3
eth ipx addr Sets the IPX network number for the Ethernet LAN
connection.
eth ipx disable Disables IPX routing across the Ethernet LAN.
eth ipx enable Enables IPX routing across the Ethernet LAN.
eth ipx frame Sets the frame encapsulation method.
eth list Lists information about the Ethernet interfaces in-
cluding the status of bridging and routing, IP proto-
col controls, and IP address and subnet mask.
eth mtu Sets the maximum transfer unit for the Ethernet in-
terface.
eth restart Starts a stopped logical Ethernet interface.
eth start Starts a stopped logical Ethernet interface.
eth stop Stops a logical Ethernet interface.
eth vrrp add Defines a VRRP attribute record for the VRID (vir-
tual router ID).
eth vrrp clear password Clears the password in a VRRP attribute record for
the VRID.
eth vrrp delete Deletes a VRRP attribute record for the VRID.
eth vrrp list Lists the VRRP attribute records for the port and
shows the status of the VRRP router.
eth vrrp set multicast Changes the multicast address used for VRRP
router announcements.
eth vrrp set option Specifies the preemption option in a VRRP at-
tribute record for the VRID.
eth vrrp set password Specifies the password in a VRRP attribute record
for the VRID.
eth vrrp set priority Specifies the priority attribute in a VRRP attribute
record for the VRID.
eth vrrp set timeinterval Specifies the time interval attribute in a VRRP at-
tribute record for the VRID.
eth ip remsrcrouteopt Adds or removes the source routing option.
Table 5-1: Ethernet Interface Command Listing (Cont.)
Command Function