- Siemens Cordless Telephone User Manual

Basic information about the drive system
12.13 Licensing
Drive Functions
Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4
531
● r0111 DRIVE-CLiQ basis sampling time selection
● p0112 Sampling times pre-setting p0115
● p0113 Selects the minimum pulse frequency
● r0114 Recommended minimum pulse frequency
● p0115[0..6] Sampling times for internal control loops
● r0116 Recommended drive sampling time
● p0118 Current controller computation deadtime
● p0799 CU inputs/outputs sampling time
● p1800 Pulse frequency
● p4099 Inputs/outputs sampling time
● r9780 SI monitoring clock cycle (Control Unit)
● r9880 SI monitoring clock cycle (Motor Module)
12.13 Licensing
Description
To use the SINAMICS S120 drive system and the activated options, you need to assign the
corresponding licenses to the hardware. When doing so, you receive a license key, which
electronically links the relevant option with the hardware.
The license key is an electronic license stamp that indicates that one or more software
licenses are owned.
Actual customer verification of the license for the software that is subject to license is called
a certificate of license.
Note
Refer to the order documentation (e.g. catalogs) for information on basic functions and
functions subject to license.
An insufficient license is indicated via the following alarm and LED on the Control Unit:
● A13000 License not sufficient
● READY LED Flashes green/red at 0.5 Hz
NOTICE
The drive can only be operated with an insufficient license during commissioning and
servicing.
The drive requires a sufficient license in order for it to operate normally.