- Siemens Cordless Telephone User Manual

Vector control
4.14 Instructions for commissioning induction motors (ASM)
Drive Functions
146 Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4
4.14 Instructions for commissioning induction motors (ASM)
Equivalent circuit diagram for vector induction motor and cable
&
5
0RWRU0RGXOH 0RWRU
&DEOHDQG
VHULHVLQGXFWDQFH
/
&DEOH
6HULHV
&DEOH
/
/
/
5
˰6
˰5
5
0
5
6
S S
S>0@
S>0@
S>0@ S>0@ S>0@
S>0@
S>0@
Figure 4-21 Equivalent circuit diagram for induction motor and cable
Induction motors, rotating
The following parameters can be entered in STARTER during the commissioning phase:
Table 4-2 Motor data type plate
Parameter Description Remark
p0304 Rated motor voltage If this value is not known, a "0" can also
be entered. Using this value, the stator
leakage inductance can be more
precisely calculated (p0356, p0357).
p0305 Rated motor current -
p0307 Rated motor power -
p0308 Rated motor power factor -
p0310 Rated motor frequency -
p0311 Motor rated speed -
p0335 Motor cooling type -
The following parameters can be optionally entered:
Table 4-3 Optional motor data
Parameter Description Remark
p0320 Motor rated magnetization
current/short-circuit current
-
p0322 Maximum motor speed -