User guide

302 Appendix A. Network Information Worksheets
Configuring PPP with Bridging
PPP with Bridging
Steps Commands Your Settings
System Settings
System Name system name <name> ..............................................
System Message system msg <message> ..............................................
Authorization
Password
system passwd <password> ..............................................
DHCP Settings
dhcp set valueoption domainname <domainname>
dhcp set valueoptiondomainnameserver <ipaddr>
..............................................
Change Login system admin <password> ..............................................
Remote Routers
New Entry remote add <remoteName> ..............................................
Link Protocol remote setProtocol PPP <remoteName> ..............................................
PVC or DLCI remote setPVC <vpi number>*<vci number>
<remoteName>
remote setDLCI <number> <remoteName>
..............................................
Security remote setAuthen <protocol> <remoteName> ..............................................
RemoteÕs Password remote setOurPasswd <password>
<remoteName>
..............................................
Bridging On/Off remote enaBridge <remoteName> ..............................................
IP and IPX Routing
IP Routing eth ip disable ..............................................
IPX Routing eth ipx disable ..............................................
Store
Reboot
save
reboot