User guide

Appendix A. Network Information Worksheets 301
Configuring PPP with IPX Routing
PPP with IPX Routing
Steps Commands Your Settings
System Settings
System Name system name <name> ...............................................
System Message system msg <message> ...............................................
Authentication Passwd system passwd <password> ...............................................
Ethernet IP Address eth ip addr <ipnet> <ipnetmask> [<port#>] ...............................................
DHCP Settings dhcp set valueoption domainname
<domainname>
...............................................
Change Login dhcp set valueoption domainnameserver
<ipaddr>
...............................................
Ethernet IPX Network
#
system admin <password>
eth ipx addr <ipxnet> [<port#>]
eth ipx frame <type>
...............................................
Remote Routers
New Entry remote add <remoteName> ...............................................
Link Protocol remote setProtocol PPP <remoteName> ...............................................
PVC or DLCI remote setPVC <vpi number>*<vci number>
<remoteName>
remote setDLCI <number> <remoteName>
...............................................
Security remote setAuthen <protocol> <remoteName> ...............................................
RemoteÕs Password remote setPasswd <password> <remoteName> ...............................................
Bridging On/Off remote disBridge <remoteName> ...............................................
IPX Routes
Add
remote addIpxroute <ipxNet> <metric> <ticks>
<remoteName>
...............................................
IPX SAPs
Add
remote addIpxsap <servicename> <ipxNet>
<ipxNode> <socket> <type> <hops>
<remoteName>
remote setIpxaddr <ipxNet> <remoteName>
...............................................
IP and IPX Routing
TCP/IP Routing eth ip disable ...............................................
IPX Routing eth ipx enable ...............................................
Store
Reboot
save
reboot