User guide

Chapter 7. Troubleshooting 297
ds cas 1
ds cas 2
ds ploop 1-2
ADSL DMT Router Debug Commands
dmt *
Displays the available DMT commands.
dmt ver
Displays the code version of line driver.
dmt speed
Displays the speed of the link.
dmt ms
Shows the modem status.
dmt link <DEFAULT | T1_413 | G_DMT | G_LITE | MULTIMODE>
Sets the link type. It is used to force the CPE into ANSI (T1.413), G_DMT, or G_LITE mode. DEFAULT
and MULTIMODE are the same. The link type survives reboots.
Frame Relay Debug Commands
frame stats
Displays statistics. For more information, see FRAME STATS, on page 150.
ATM Tracing Commands
atom print
Shows count of good and bad atm cells and frames.
atom rx <on | off>
Shows AAL5 frames received.
atom promisc on
Turns on promiscuous mode (rx ATM cells no matter what VPI*VCI).
atom cellrx <on | off>
Traces ATM cells received.
atom tx <on | off>
Traces ATM cells sent.
atom stats <n>