User guide

Chapter 5. Command Line Interface Reference 241
L2TP LIST
Provides a complete display of the current conÞguration settings for tunnel(s), except for the authentication
password/secret.
L2TP SET DIALOUT
Lets the LNS instruct the L2TP client to use an ISDN phone line to place a call on its behalf.
l2tp list |<TunnelName>|
TunnelName Name of the tunnel (character string). The name is case sensitive.
Example:
l2tp list PacingAtWork
# l2tp list
INFORMATION FOR <pacingAtWork>
type ........................... L2TPClient (LAC-will not dial)/LNS
All Incoming Calls Tunneled here . no
CHAP challenge issued .......... yes
hidden AVPs used ............... yes
sequencing/pacing .............. window pacing
sequencing/pacing is ......... required
window size for sequencing/pacing 10
ip address ..................... 10.0.0.1
Our host name .................. pacingAtHome
ACTIVE TUNNEL .................. UNKNOWN
current state ................ CLOSED
LOCAL TUNNEL ID .............. 1
REMOTE TUNNEL ID ............. 0
remote firmware .............. 0
remote ip address ............ 10.0.0.1
LAC SESSION serial number ... Ô 0
current state .............. CLOSED
LOCAL CALL ID .............. 1
local window size ........ 10
sequencing/pacing ........ WINDOW PACING
sequencing/pacing is ... required
REMOTE CALL ID ............. 0
remote window size ....... 0
l2tp set dialout yes|no <TunnelName>
yes This option lets the router place outgoing calls.
no This option prevents the router from placing outgoing calls.The default is no.
TunnelName Name of the tunnel (character string). The name is case-sensitive.