User guide

224 Chapter 5. Command Line Interface Reference
SDSL commands:
? help eoc
save speed stats
terminal
# sdsl eoc
EOC disabled
# sdsl eoc enable
EOC enabled
# sdsl save
# sdsl speed
SDSL Current Speed (CO-controlled): 192 Kb/s
# sdsl stats
FRAMER Statistics:
Framer Interrupts...... 1217
Out of frame errors.... 0
HEC errors received.... 0
CRC errors received.... 0
FEBE errors received... 0
Remote Out-of-frame.... 7
Remote HEC errors...... 0
EOC enabled
EOC Statistics:
Receive EOC interrupts. 1210
Good frames received... 0
Overruns received ..... 0
Aborts received ....... 0
Illegal frames received 0
CRC errors received ... 0
Frames too long........ 0
Bad frame sizes........ 0
Unrecognized protocols. 0
Wrong EOC Versions..... 0
Transmit EOC interrupts 1210
Frames transmitted..... 0
SDSL SAVE
Saves SDSL configuration changes across reboots.
SDSL SPEED
Manages the speed of the SDSL line.
At the Central Office (CO) end, the command sets the speed manually only.
At the Customer Premises Equipment (CPE) end, the command can:
¥ Display the current speed setting and list the available speeds (sdsl speed)
sdsl save
Example:
sdsl save