User guide

Chapter 5. Command Line Interface Reference 207
REMOTE STATSCLEAR
Allows the user to reset the statistics counter for a given remote router.
REMOTE UNBINDIPVIRTUALROUTE
Removes a remote route from the named IP virtual routing table.
To list the remote routes, use the remote listIProutes command, page 196. To add a remote route, use the
remote bindIPVirtualRoute command, page 186.
Note: A route change in an IP virtual routing table takes effect immediately. However, the change is lost if it is
not saved before the next reboot.
ipaddr IP address of the remote network or station (4 decimals separated by periods).
tablename IP virtual routing table from which the route is removed (character string).
remoteName Name of the remote router (character string).
Example:
The following command removes a route from virtual routing table FRANCISCO. The route removed is for
IP address 10.1.2.0 and remote router HQ.
remote unbindIPVirtualRoute 10.1.2.0 FRANCISCO HQ
Current state: connected, not connected, currently connecting, currently attempting to connect, currently
closing, out of service, or not known.
Bandwidth state: idle, increasing, decreasing, decreasing hold, unknown, or idle.
remote statsclear <remoteName>
remoteName Name of the remote router (character string).
Example:
remote statsclear HQ
remote unbindIPVirtualRoute <ipaddr> <tablename> <remoteName>