User guide

Chapter 5. Command Line Interface Reference 189
REMOTE DELOURPASSWD
Removes the unique CHAP or PAP authentication password entries established by the command remote
setOurPasswd.
REMOTE DELOURSYSNAME
Removes the unique CHAP or PAP authentication system name entries established by the command remote
setOurSysName.
REMOTE DELSERVER
This Network Address Translation (NAT) command deletes an entry created by the remote addServer command.
Refer to the section Server Configuration, on page 92, for detailed information.
remote delOurPasswd <remoteName>
remoteName Name of the remote router (character string).
Example:
remote delOurPasswd HQ
remote delOurSysName <remoteName>
remoteName Name of the remote router (character string).
Example:
remote delOurSysName HQ
remote delServer <ipaddr>|discard|me <protocolid> |tcp|udp <first port> |ftp|telnet|smtp|snmp|http [<last
port> [<first private port>]] <remoteName>
ipaddr IP address of the host selected as server in the format of 4 decimals separated by periods.
discard Discards the incoming server request.
me Sends the incoming server request to the local router, regardless of its IP address.
protocolid Protocol used by the selected server; can be tcp or udp.
Þrst port First or only port as seen by the remote end. Port used by the selected server. Can be as string
such as ftp, telnet, smtp, snmp, or http, or a numeric value between 0 and 65,535. A numeric
value of 0 will match any port.
last port If speciÞed, this is used with <Þrst port> to specify a range of ports as seen by the remote end
for the server on the LAN.
Þrst private port If speciÞed, this is a port remapping of the incoming request from the remote end.
remoteName Name of the remote router (character string).