User guide

162 Chapter 5. Command Line Interface Reference
SYSTEM LIST
Lists the target routerÕs system name, security authentication protocol, callerID and data-as-voice status, and
system message.
SYSTEM LOG
Allows logging of the routerÕs activity in a Telnet session.
SYSTEM MSG
Sets a message that is saved in the target router you are configuring.
system list
Example:
system list
Response:
GENERAL INFORMATION FOR <SOHO>
System started on.................... 1/7/1998 at 13:29
Authentication override.......... NONE
WAN to WAN Forwarding.............. yes
BOOTP/DHCP Server address........ none
Telnet Port...................... default (23)
SNMP Port............................ default (161)
System message: Configured January 1998
system log start | stop | status
start Used to monitor router activity at all times.
Example:
system log start
stop Used to discontinue the logging utility at the console.
Example:
system log stop
status Used to Þnd out if other users (yourself included) are using this utility.
Example:
system log status
system msg <message>
message Message (character string. Space characters are not allowed within the message; you may use
underscore characters instead. If you do not enter a message, the current message is displayed.
The message may be no more than 255 characters.