User guide

152 Chapter 5. Command Line Interface Reference
Router ConÞguration Commands
Configuration commands are used to set configuration information for each functional capability of the router.
Each functional capability has a specific prefix for its associated commands:
¥ ? or help Summary of available commands
¥ system Target router system commands
¥ eth ip Ethernet IP routing commands
¥ remote Remote router database commands
¥ adsl Asymmetric Digital Subscriber Line commands (ADSL routers only)
¥ atm Asynchronous Transfer Mode commands (ATM routers only)
¥ eth Dual-Ethernet router commands only
¥ hdsl High-speed Digital Subscriber Line commands (HDSL routers only)
¥ isdn (for IDSL) ISDN Digital Subscriber Line (IDSL routers only)
¥ sdsl Symmetric Digital Subscriber Line commands (SDSL routers only)
¥ dhcp Dynamic Host ConÞguration Protocol commands
¥ l2tp Layer-2 Tunneling Protocol commands
¥ save Save conÞguration to FLASH memory commands
¥ erase Erase conÞguration from FLASH memory commands
¥ filter Filtering commands
¥ ike Internet Key Exchange commands
¥ ipsec IPSec commands