User guide

Chapter 5. Command Line Interface Reference 135
Chapter 5. Command Line Interface Reference
This chapter lists the formats of the commands you can enter using the Command Line Interface.
The commands are organized as follows:
¥ System-level commands
¥ File system commands
¥ Frame commands
¥ Router configuration commands:
system
eth
remote
adsl
atm
eth (specific to the Dual- Ethernet router)
hdsl
isdn (specific to the IDSL router)
sdsl
dhcp
l2tp
filters
save
erase
ike
ipsec
Command Line Interface Conventions
The Command Line Interface follows these conventions:
¥ Command line length may be up to 120 characters long.
¥ The Command Line Interface is not case-sensitive except for passwords and router names.
¥ All parameters are positional; i.e., each keyword/parameter must be entered in the correct order, as shown in
the command format in this manual.
The command formats shown in this manual follow these conventions:
¥ Items that appear in bold type must be typed exactly as they appear.However, commands can be shortened to
just those characters necessary to make the command unique.
¥ Items that appear in italics are placeholders representing specific information that you supply.
¥ Parameters enclosedin the characters < and > must be entered.
¥ Parameters enclosed in the characters [ and ] are optional.