User guide

Chapter 4. Configuring Special Features 133
Specifies the authentication key (hexadecimal).
ipsec set ident <ident> <SAname>
Specifies the identifier (SPID) for the IPSec tunnel. It must match the SPID at the other end of the tunnel,
that is, the tx SPID on this end must match the rx SPID on the other end.
ipsec set service <ESP | AH | BOTH> <SAname>
Selects the authentication and/or encryption services used: AH authentication, ESP encryption, or both
ESP encryption and ESP authentication (encryption applied first and then authentication).
ipsec set compression <NONE | LZS> <SAname>
Selects either LZS compression or no compression.