User guide

118 Chapter 4. Configuring Special Features
¥ Configuration commands for LNSserver
Note: LNSserver is a DSL router.
Define LNSserver:
system name lnsserver
system passwd serverpassword
system msg Script_for_LNS_called_HQ
system securitytimer 60
Enable IP routing:
eth ip enable
eth ip addr 192.168.100.1 255.255.255.0
Define DHCP settings for DNS servers, domain:
dhcp set value domainname flowpoint.com
dhcp set value domainnameserver 192.168.100.68
Set up DSL parameters:
sd speed 1152
Define a remote for the Tunnel:
remote add lacclient
remote setpass clientpassword lacclient
remote setLAC tunnelAtHome lacclient
remote setauthen chap lacclient
remote addiproute 192.168.101.0 255.255.255.0 1 lacclient
Define a remote (internet):
remote add internet
remote setphone isdn 1 5552000 internet
remote setphone isdn 2 5554000 internet
remote setauthen chap internet
remote setpasswd internet internet
remote addiproute 0.0.0.0 0.0.0.0 1 internet
remote setsrcipaddr 192.168.110.1 255.255.255.255 internet
remote addiproute 192.168.101.1 255.255.255.255 1 internet
remote setprotocol ppp internet
remote setpvc 0*38 internet
Define the actual tunnel:
l2tp add tunnelAtHome
l2tp set chapsecret tunnelsecret tunnelAtHome
l2tp set ourtunnelname tunnelAtWork tunnelAtHome
save
reboot