Specifications

ManualsBrandsEfficient Networks ManualsComputer equipmentRouter family Command line interface

66 Chapter 3. Configuring Router Software

Sample Configuration 1: Check the Configuration with the LIST Commands

Type the following commands to obtain a list of your configuration.

system list

GENERAL INFORMATION FOR <SOHO>

System started on.................... 12/1/1998 at 17:41

Authentication override.............. NONE

WAN to WAN Forwarding................. yes

BOOTP/DHCP Server address............ none

Telnet Port.......................... default (23)

SNMP Port.............................. default (161)

System message: configured Dec-1998

remote list

INFORMATION FOR <HQ>

Status............................... enabled

Protocol in use...................... PPP

Authentication....................... enabled

Authentication level required........ PAP

Connection Identifier (VPI*VCI)...... 0*39

IP address translation............... off

Compression Negotiation.............. off

Source IP address/subnet mask........ 0.0.0.0/0.0.0.0

Remote IP address/subnet mask........ 0.0.0.0/0.0.0.0

Send IP RIP to this dest............. no

Send IP default route if known..... no

Receive IP RIP from this dest........ no

Receive IP default route by RIP.... no

Keep this IP destination private..... yes

Total IP remote routes............... 1

172.16.0.0/255.255.255.0/1

IPX network number................... 00000789

Total IPX remote routes.............. 1

00001001/1/4

Total IPX SAPs....................... 1

SERV312_FP 00001001 00:00:00:00:00:01 0451 0003 1

Bridging enabled..................... no

Exchange spanning tree with dest... yes

INFORMATION FOR <ISP>