Specifications

Chapter 3. Configuring Router Software 61
Sample ConÞgurations
Sample Configuration 1: PPP with IP and IPX
This configuration example comprises:
¥ A scenario describing the configuration
¥ A diagram showing the configuration of the SOHO router
¥ Tables containing the configuration settings for this example
¥ Several list command outputs that are used to check the information entered for this particular configuration
¥ Information about the names and passwords that are used in this configuration example (required for PPP)
Note: Appendix A contains blank Network Information Worksheets; use them to fill in the information for your
own configuration. If you selected Òinstall documentationÓ, these samples and others are copied from the
installation CD into the samples directory where the GUI was installed .
Scenario:
In this configuration example of a hypothetical network, a small office/home office (SOHO) will access:
¥ The Internet through an Internet Service Provider (ISP); it uses PPP as the link protocol with IP routing
as the network protocol. Network Address Translation (NAT) is enabled to the ISP, because the ISP
assigned the SOHO only one IP address.
¥ A central site (HQ) through a Network Service Provider (NSP provides access to the DSL/ATM Wide
Area Network); it uses PPP as the Link Protocol with IP and IPX as its network protocols.
IP addresses are issued by the DHCP server. DHCP will be set up to issue DNS information to the SOHO LAN.