Specifications

60 Chapter 3. Configuring Router Software
Test IPX Routing
One way to test IPX routing is to check for access to servers on the remote LAN. Under Windows, use the
NetWare Connections selection provided with NetWare User Tools. Under DOS, use the command pconsole or
type login on the login drive (usually F:). Select the printer server and verify that the server you have defined is
listed. When you attempt to access the server, the router will connect to the remote router using the DSL line.
If you cannot access the remote server:
¥ Check that the local Ethernet LAN IPX network number is correct.
¥ Verify that the WAN link network number is the same as the remote WAN link network number.
¥ Check cable connections and pinouts.
¥ Verify that the IPX routes and IPX SAPs you have specified are correct.
¥ List the contents of the routing and services tables using the ipxroutes and ipxsaps commands, respectively.
¥ Make sure that the security authentication method and password that you configured match the remote router.