Specifications

48 Chapter 3. Configuring Router Software
ConÞguration Tables
The following tables give you step-by-step instructions for standard configurations of the following Network
Protocol/Link Protocol associations, as well as a configuration table for a Dual-Ethernet Router:
¥ PPP Link Protocol with IP Routing Network Protocol
¥ PPP Link Protocol with IPX Routing Network Protocol
¥ PPP Link Protocol with Bridging Network Protocol
¥ RFC 1483/RFC 1490 Link Protocols with IP Routing Network Protocol
¥ RFC 1483/RFC 1490 Link Protocols with IPX Routing Network Protocol
¥ RFC 1483/RFC 1490 Link Protocols with Bridging Network Protocol
¥ RFC 1483MER/RFC 1490MER Link Protocols with IP Network Protocol
¥ FRF8 Link Protocol with IP Routing Network Protocol
¥ Mixed Network Protocols (combinations of two or three network protocols)
¥ Dual-Ethernet Router with IP routing
Note: Blank Network Configuration Worksheets are available in Appendix A.
Using the tables:
1. Find the configuration table that fits your particular Network Protocol/Link Protocol association. These tables
are designed to provide easy step-by-step instructions.
2. Use the blank Network Configuration Worksheets provided in Appendix A to enter the commands in the
order that they are given in the Commands column of the configuration tables.
3. You may want to refer to the sample configurations at the end of this chapter.