Specifications

362 Appendix A. Network Information Worksheets
Configuring RFC 1483 / RFC 1490 with Bridging
RFC 1483 / RFC 1490 with Bridging
Steps Commands Your Settings
System Settings
System Message system msg <message> ...............................................
DHCP Settings dhcp set valueoption domainname <domainname>
dhcp set valueoption domainnameserver <ipaddr>
...............................................
Change Login system admin <password> ...............................................
Remote Routers
New Entry remote add <remoteName> ...............................................
Link Protocol/PVC
a
(for ATM routers)
a Enter this information if you are using RFC 1483 in an ATM environment.
remote setProtocol RFC1483 <remoteName>
remote setPVC <vpi number>*<vci number>
<remoteName>
...............................................
Link Protocol /DLCI
b
(for Frame Relay Routers)
b Enter this information if you are using RFC 1490 in a Frame-Relay environment.
remote setProtocol FR <remoteName>
remote setDLCI <number><remoteName>
...............................................
Bridging On/Off remote enaBridge <remoteName> ...............................................
IP and IPX Routing
IP Routing eth ip disable ...............................................
IPX Routing eth ipx disable ...............................................
Store
Reboot
save
reboot