Specifications

360 Appendix A. Network Information Worksheets
Configuring RFC 1483 / RFC 1490 with IP Routing
RFC 1483 / RFC 1490 with IP Routing
Steps Commands Your Settings
System Settings
System Message system msg <message> ...............................................
Ethernet IP Address eth ip addr <ipnet> <ipnetmask> [port#>] ...............................................
DHCP Settings
dhcp set valueoption domainname <domainname>
...............................................
dhcp set valueoption domainnameserver < ipaddr> ...............................................
Change Login system admin < password> ...............................................
Remote Routers
New Entry remote add <remoteName> ...............................................
Link Protocol/PVC
a
(for ATM routers)
a Enter this information if you are using RFC 1483 in an ATM environment.
remote setProtocol RFC1483 <remoteName>
remote setPVC <vpi number> * <vci number>
<remoteName>
...............................................
Link Protocol /DLCI
b
(for Frame Relay Routers)
b Enter this information if you are using RFC 1490 in a Frame-Relay environment.
remote setProtocol FR <remoteName>
remote setDLCI <number><remoteName>
...............................................
Bridging On/Off remote disBridge <remoteName> ...............................................
TCP/IP Route Address remote addiproute <ipnet> <ipnetmask>
<hops> <remoteName>
...............................................
If NAT is enabled:
To enable NAT
-and-
You must enter a Source
WAN Port Address
remote setIpTranslate on <remoteName>
remote setSrcIpAddr <ipaddr> <ipnetmask>
<remoteName>
...............................................
If NAT is OFF:
You may need to enter a
Source WAN Port
Address
remote setSrcIpAddr <ipaddr> <ipnetmask>
<remoteName>
...............................................
IP and IPX Routing
TCP/IP Routing
(Internet Firewall)
eth ip enable
eth ip Þrewall <on | off>
...............................................
IPX Routing eth ipx disable ...............................................
Store
Reboot
save
reboot