Specifications

358 Appendix A. Network Information Worksheets
Configuring PPP with IPX Routing
PPP with IPX Routing
Steps Commands Your Settings
System Settings
System Name system name <name> ..............................................
System Message system msg <message> ..............................................
Authentication Passwd system passwd <password> ..............................................
Ethernet IP Address eth ip addr <ipnet> <ipnetmask> [<port#>] ..............................................
DHCP Settings dhcp set valueoption domainname
<domainname>
..............................................
Change Login dhcp set valueoption domainnameserver
<ipaddr>
..............................................
Ethernet IPX Network
#
system admin <password>
eth ipx addr <ipxnet> [<port#>]
eth ipx frame <type>
..............................................
Remote Routers
New Entry remote add <remoteName> ..............................................
Link Protocol remote setProtocol PPP <remoteName> ..............................................
PVC or DLCI remote setPVC <vpi number>*<vci number>
<remoteName>
remote setDLCI <number> <remoteName>
..............................................
Security remote setAuthen <protocol> <remoteName> ..............................................
RemoteÕs Password remote setPasswd <password> <remoteName> ..............................................
Bridging On/Off remote disBridge <remoteName> ..............................................
IPX Routes
Add
remote addIpxroute <ipxNet> <metric> <ticks>
<remoteName>
..............................................
IPX SAPs
Add
remote addIpxsap <servicename> <ipxNet>
<ipxNode> <socket> <type> <hops>
<remoteName>
remote setIpxaddr <ipxNet> <remoteName>
..............................................
IP and IPX Routing
TCP/IP Routing eth ip disable ..............................................
IPX Routing eth ipx enable ..............................................
Store
Reboot
save
reboot