Specifications

352 Chapter 8. Command Reference
IPSEC ENABLE
Enables a defined IPSec SA entry, indicating it is complete and ready to be used. The command can also re-enable
a disabled SA entry.
ipsec enable <SAname>
SAname Name for the IPSec SA to be enabled.To see the IPSec SA names in use, use the ipsec list
command.
Example: ipsec enable show_rx
IPSEC FLUSH
Clears all IPSec definitions.
ipsec flush
IPSEC LIST
Lists one or all IPSec SA entries.
ipsec list [<SAname>]
SAname Optional name for the IPSec SA to be listed.
Example:
# ipsec list
IPSec security associations:
show_rx
Gateway: 207.135.89.233
Inbound
Tunnel
BOTH
3DES
key=111111111122222222223333333333444444444455555555
SHA1
key=aaaaaaaaaabbbbbbbbbbccccccccccdddddddddd (20)
No compression
id =424242
seq=1, bitmap=ffffffff
show_tx
Gateway: 207.135.89.233
Outbound
Tunnel
BOTH
3DES