Specifications

334 Chapter 8. Command Reference
# pppoe list
PPPoE Client Session ...... DialUpPPP.net
PPPoE/Ifs number..... 1
Access Concentrator.. 15021109931568-efficient
Peer MAC Address .... 00:10:67:00:66:E2
Session ID .......... 2
State ............... 2
Flags ............... 1
# pppoe close 1
PPPOE LIST
Lists information about the currently active PPPoE sessions.
Output Fields:
PPPoE Client Session . . . . . Service name.
PPPoE/Ifs number . . . . Number identifying the session. It is used on the pppoe close command.
Access Concentrator. . . Identification of the access concentrator to which the session is connected.
Peer MAC Address . . . MAC address to which the session is connected.
Session ID . . . . . . . . . . Identification of the session by the access concentrator. The service provider
needs this ID to find the access concentrator log for the session.
State . . . . . . . . . . . . . . . Internal value indicating the state of the session:
0 Initial state.
1 Session has finished.
2 Session has been established and can send and receive user data.
3 Reserved.
4 Session is attempting to discover an access concentrator to provide the
requested service.
5 Reserved.
6 Session has selected an access concentrator to provide the service and is
waiting for it to set up the session.
Flags . . . . . . . . . . . . . . . Internal flag. Currently, the only defined value is 1, indicating that this is a client
PPPoE session.
Example:
# pppoe list
PPPoE Client Session ...... DialUpPPP.net
PPPoE/Ifs number..... 1
Access Concentrator.. 15021109931568-efficient
Peer MAC Address .... 00:10:67:00:66:E2
Session ID .......... 2
State ............... 2
Flags ............... 1
pppoe list