Specifications

324 Chapter 8. Command Reference
L2TP LIST
Provides a complete display of the current conÞguration settings for tunnel(s), except for the authentication
password/secret.
L2TP SET ADDRESS
Used to deÞne the IP address of the other end of the tunnel, either the remote L2TP Access Concentrator (LAC) or
remote L2TP Network Server (LNS).
none No incoming calls are allowed to be forwarded through the tunnel to an LNS
TunnelName Name of the tunnel (character string). The name is case-sensitive.
Example:
l2tp forward PacingAtWork
l2tp list |<TunnelName>|
TunnelName Name of the tunnel (character string). The name is case sensitive.
Example:
l2tp list PacingAtWork
# l2tp list
INFORMATION FOR <pacingAtWork>
type ........................... L2TPClient (LAC-will not dial)/LNS
All Incoming Calls Tunneled here . no
CHAP challenge issued .......... yes
hidden AVPs used ............... yes
sequencing/pacing .............. window pacing
sequencing/pacing is ......... required
window size for sequencing/pacing 10
ip address ..................... 10.0.0.1
Our host name .................. pacingAtHome
ACTIVE TUNNEL .................. UNKNOWN
current state ................ CLOSED
LOCAL TUNNEL ID .............. 1
REMOTE TUNNEL ID ............. 0
remote firmware .............. 0
remote ip address ............ 10.0.0.1
LAC SESSION serial number ... Ô 0
current state .............. CLOSED
LOCAL CALL ID .............. 1
local window size ........ 10
sequencing/pacing ........ WINDOW PACING
sequencing/pacing is ... required
REMOTE CALL ID ............. 0
remote window size ....... 0