Specifications

Chapter 8. Command Reference 309
DHCP Commands
The following DHCP (Dynamic Host Configuration Protocol) commands allow you to:
¥ Enable and disable subnetworks and client leases.
¥ Add subnetworks and client leases.
¥ Set the lease time.
¥ Change client leases manually.
¥ Set option values globally, for a subnetwork, or for a client lease.
¥ Enable/disable BootP.
¥ Use BootP to specify the boot server.
¥ Define option types.
To read about DHCP concepts and the DHCP configuration process, see DHCP (Dynamic Host Configuration
Protocol), on page 82.
DHCP ?
Lists the supported keywords.
DHCP ADD
Adds a subnetwork, a client lease, or an option type.
dhcp ?
Response:
Sub-commands for dhcp
? help set
list bootp clear
enable add addrelay
del delrelay disable
dhcp add [<net> <mask> ]| <ipaddr> | <code><min><max><type>
net IP address of the subnetwork lease in the format of 4 decimals separated by periods.
mask IP network mask, in the format of 4 decimals separated by periods.
ipaddr IP address of the client lease in the format of 4 decimals separated by periods.
code The user-deÞned code can be a number between 128 to 254 or a keyword.
min Minimum number of value(s).