Specifications

302 Chapter 8. Command Reference
The IDSL bandwidth is composed of two 64 Kbps B channels, plus one 16 Kbps D channel. Your speed setting
indicates the channels that you are using.
64 64 Kbps (one channel)
128 128 Kbps (two channels)
144 144 Kbps (three channels)
Example:
# idsl set speed 144
IDSL SET SWITCH
Specifies link speeds of 64, 128, or 144 Kbps for the IDSL connection.
FR64 Link speed of 64 Kbps
FR128 Link speed of 128 Kbps
FR144 Link speed of 144 Kbps
Example:
# idsl set switch fr144
REMOTE SETDLCI
This command sets the DLCI for the remote router entry. The DLCI (Data Link Connection Identifier) is an
address identifying a logical connection in a Frame Relay environment. The DLCI is generally provided by the
Network Service Provider.
The IDSL router can support several DLCI virtual circuits over a Frame-Relay IDSL link. However, a typical
connection to the Internet requires only one DLCI. The DLCI number must match the DLCI of the remote end.
idsl set speed 64 | 128 | 144
idsl set switch FR64 | FR128 | FR144
remote setDLCI <dlcinumber> <remoteName>
dlcinumber Frame Relay number identifying the data-link connection.
remoteName Name of the remote router (character string).
Example:
remote setDLCI 16 HQ