Specifications

Chapter 8. Command Reference 299
HDSL ?
Lists the supported keywords.
HDSL SAVE
Saves the HDSL-related changes across restarts and reboots.
HDSL SPEED
CO end: Sets the speed manually on the Central Office (CO) end only.
CPE end: The router on the Customer Premises End (CPE) is always in auto-speed mode: it uses an auto-speed
algorithm to attempt to match the CO speed. The command hdsl speed noauto is used to override auto-speed.
Note 1: The command hdsl speed (with no option) displays the current speed if the modem has activated
successfully.
Note 2: hdsl speed noauto should be followed by the command hdsl save to be persistent across restarts and
reboots.
Note 3: During auto-speed search, use the command hdsl speed <speed> to stop the search and restart it at the
speed you just entered.
hdsl ?
Example:
hdsl ?
Response:
HDSL commands:
? help terminal
save speed
hdsl save
Example:
hdsl save
hdsl speed [384 | 1168 | noauto]
384 Default speed for the CO.
1168 Authorized non-default speeds for the CO in Mbps.
noauto Used to override auto-speed on the CPE.
Example:
hdsl speed 1168
hdsl speed noauto
hdsl speed