Specifications

280 Chapter 8. Command Reference
routersÕ local WAN port. This command requires that you define a Source WAN IP Address with the command:
remote setSrcIpAddr
REMOTE SETIPXADDR
Sets the IPX network number for the remote WAN connection.
REMOTE SETIPXOPTIONS
Turns on or turns off the IPX option RIPSAP for the remote WAN connection.
on | off Sets the option on or off.
remote Name of the remote router (character string).
Example:
remote setIpxOptions ripsap on HQ
REMOTE SETMAXLINE
Sets the maximum links (1 or 2) for a DOD (dial on demand) connection, that is, a connection where the link goes
up and down. These links include those for ISDN, L2TP tunnels, IPSec tunnels, and dial backup.
If you set the maximum links to 2, bandwidth on demand management determines their actual usage; see the
remote setBWthresh command (page 276).
1 | 2 Maximum number of links to be used for the connection (1 or 2). The default is 1.
remoteName Name of the remote router (character string).
Example:
remote setIPTranslate on|off <remoteName>
remoteName Name of the remote router (character string).
Example:
remote setIPTranslate on HQ
remote setIpxaddr <ipxNet> [port#]
ixpNet IPX network number represented by 8 hexadecimal characters.
port# Port number of the Ethernet LAN. This number must be either 0 or it may be omitted.
Example:
remote setIpxaddr 789 HQ
remote setIpxOptions ripsap on | off <remote>
remote setMaxLine 1 | 2 <remoteName>