Specifications

272 Chapter 8. Command Reference
mtu.................................. 1500
REMOTE LISTBRIDGE
Lists the current bridge settings for the specified remote router entry.
remoteName Name of the remote router (character string). If a name is omitted, the bridge settings for all
remote router entries are listed.
Example:
# remote listbridge
BRIDGING INFORMATION FOR <internet>
Bridging enabled.................... yes
Exchange spanning tree with dest... no
Bridge only PPPoE with dest........ no
BRIDGING INFORMATION FOR <efficient>
Bridging enabled.................... no
Exchange spanning tree with dest... no
Bridge only PPPoE with dest........ no
Mac addresses that dial remote..... none
REMOTE LISTIPROUTES
Lists IP information for a remote router or, if the router name is omitted, for all routers in the remote router
database. The IP information includes all network or station IP addresses defined for the LAN connected beyond
the remote router.
This command lists all routes defined for the remote router, including those defined in the default routing table
and in any virtual routing tables.
Example:
The following command lists routing information for remote router HQ. It lists five routes that use HQ, the first
four are in the default routing table and the fifth is in virtual routing table FRANCISCO.
# remote listIproutes HQ
IP INFORMATION FOR <HQ>
Send IP RIP to this dest............. no
Send IP default route if known..... no
Receive IP RIP from this dest........ rip-1 compatible
Receive IP default route by RIP.... no
Keep this IP destination private..... yes
remote listBridge <remoteName>
remote listIpRoutes [remoteName]
remoteName Name of the remote router (character string).
Example:
remote listIproutes HQ