Specifications

266 Chapter 8. Command Reference
REMOTE DISAUTHEN
This command is intended for situations where third-party routers cannot be authenticated; the target router will
not attempt to authenticate the remote router.
REMOTE DISBRIDGE
Disables bridging from the target router to the remote router.
Note: This command requires rebooting the target system for the change to take effect.
REMOTE ENAAUTHEN
With this command the target router will try to negotiate authentication as defined in the remote router's database.
REMOTE ENABLE
Enables use of an entry in the remote router database. Although the command makes it possible to use the remote
entry, it does not start an active session for the remote.
Note: The entry remains enabled across reboots. The entry remains enabled until it is disabled by a remote
disable command (page 265).
remote disAuthen <remoteName>
remoteName Name of the remote router (character string).
Example:
remote disAuthen HQ
remote disBridge <remoteName>
remoteName Name of the remote router (character string).
Example:
remote disBridge HQ
remote enaAuthen <remoteName>
remoteName Name of the remote router (character string).
Example:
remote enaAuthen HQ
remote enable <remoteName>
remoteName Name of the remote router (character string).
Example:
remote enable HQ