Specifications

Chapter 8. Command Reference 217
percentage Minimum success rate required during a ping test of the addresses in the group (integer, 0 thru 99).
The default is 50.
group Optional number of a group (integer, 0 thru 65535). The default is group 0.
Examples:
The following command changes the success rate to 75% for addresses in group 0.
system backup successrate 75
The following command disables the pinging of addresses in group 1.
system backup successrate 0 1
SYSTEM BLOCKNETBIOS
The router can block all netbios and netbui requests from being sent over the wan. This command sets the
defaultvalue for the entire router when a remote router is defined.
After a remote device is deÞned, the command remote blockNetBIOS on|off <remoteName> can enable or disable
this feature.
SYSTEM COMMUNITY
Enhances SNMP security by allowing the user to change the SNMP community name from its default value of
ÒpublicÓ to a different value. Refer to Controlling Remote Management, on page 101.
Note: The command system community (with no value) will display the current community name.
SYSTEM DEFAULTMODEM
Lists the default modem settings. The modem settings are for the backup V.90 modem connected to the console
port.
To change the modem settings, use the system modem command (page 223). For more information on the Dial
Backup option, see page 149.
system blockNetBIOS Default yes|no
system community [<SNMP community name>]
SNMP community name String of up to 40 characters.
Example 1:
system community fred
Example 2:
system community
system defaultmodem