Specifications

206 Chapter 8. Command Reference
Router ConÞguration Commands
Configuration commands are used to set configuration information for each functional capability of the router.
Each functional capability has a specific prefix for its associated commands:
¥ ? or help Summary of available commands
¥ system Target router system commands
¥ eth ip Ethernet IP routing commands
¥ remote Remote router database commands
¥ adsl Asymmetric Digital Subscriber Line commands (ADSL routers only)
¥ atm Asynchronous Transfer Mode commands (ATM routers only)
¥ eth Dual-Ethernet router commands only
¥ hdsl High-speed Digital Subscriber Line commands (HDSL routers only)
¥ isdn (for IDSL) ISDN Digital Subscriber Line (IDSL routers only)
¥ sdsl Symmetric Digital Subscriber Line commands (SDSL routers only)
¥ dhcp Dynamic Host ConÞguration Protocol commands
¥ l2tp Layer-2 Tunneling Protocol commands
¥ save Save conÞguration to FLASH memory commands
¥ erase Erase conÞguration from FLASH memory commands
¥ filter Filtering commands
¥ ike Internet Key Exchange commands
¥ ipsec IPSec commands