Specifications

Chapter 7. Troubleshooting 177
Explanation: PAP cannot be negotiated.
Can't agree with <router/user> on what their IP address should be
Explanation: The IP address entry for the remote router in the remote router database does not match what the
local router expects.
Can't obtain an IP address from <router/user>: one is needed in single user mode
Informative message.
Can't supply an IP address to <router/user>
Explanation: The remote end requests an IP address from the local end, which cannot supply it.
Cannot remove SYSTEM.CNF
Informative message.
Connecting to <router/user> @ <number> over <link/number>
Explanation: The local router is trying to connect to the specified remote destination.
Data Mode
Explanation: The connection is established and operational.
Duplicate IPX route to <router/user>
Explanation: There exist two routes to the same IPX destination. Remove one of the routes.
Duplicate IPX SAP <SAP number> to <router/user>
Explanation: There exist two IPX SAPs for the same IPX destination. Remove one of the SAPs.
Duplicate route <IP route> found on remote <router/user>
Explanation: There exist two IP routes to the same IP destination. One route needs to be removed.
Idle
Explanation: Data is not being transmitted.
IP is configured for numbered mode with <router/user>, but no address for it
Explanation: On one end of the connection, remote entries have been configured for numbered mode. On the other
end, remote entries have been configured for unnumbered mode. Neither end cab communicate with the other.
No Signal Detected -- Check WAN Cable!
Explanation: (SDSL-specific error message) Your SDSL router cannot establish connectivity. Check your
physical line.
No system name known - using defaults