Specifications

How to Access the Command Line 13
Terminal Session under Windows (HyperTerminal)
To open the HyperTerminal emulator available under the Windows operating system:
1. Click Start on your desktop and then select Programs > Accessories > Communications > Hyperterminal .
2. Double-click Hypertrm.exe.
3. In the Phone Number window, under Connect using , select Choose Direct to Com 1 (or 2 ).
4. In the Com 1 (or 2 ) Properties page , enter the following port settings and select OK :
3. In the Connection Description
window, enter a name for the
connection and select OK.
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: Hardware
(To use a baud rate other than
9600, see page 157.)