Product specifications

Chapter 3: Installation and Setup Efficient Networks
®
Router family
Technical Reference Guide
Page 3-48 Efficient Networks
®
Configuring RFC 1483 / RFC 1490 with IPX Routing
This table outlines configuration commands for the RFC 1483 and RFC 1490 link
protocols with the IPX Routing network protocol.
Table 3-6: RFC 1483 / RFC 1490 with IPX Routing
Steps Settings Commands
System Settings
System Message Optional
system msg
<message>
Ethernet IP Address As Required
eth ip addr
<ipaddr> <ipnetmask> [<port#>]
DHCP Settings Already enabled;
additional settings
may be required
dhcp set valueoption
domainname <domain-
name>
dhcp set valueoption domainnameserver <ipad-
dr>
Ethernet IPX Network
#
Enter: IPX Network
# Frame Type (de-
fault is 802.2)
eth ipx frame
<type>
Change Login Optional
password
<password>
Remote Routers
New Entry Enter: Remote
Name
remote add
<remoteName>
Link Protocol/PVC
a
(for ATM routers)
Select: RFC 1483
Enter: VPI/VCI num-
bers
remote setprotocol
rfc1483 <remotename>
remote setpvc <vpi number>*<vci number> <re-
moteName>
Link Protocol/DLCI
b
(for Frame Relay rout-
ers)
Select: FR
Enter: DLCI number
remote setprotocol
fr <remotename>
remote setdlci <number> <remotename>
Bridging On/Off Must be off
remote disbridge
<remoteName>
IPX Routes Add Enter appropriate
info
remote addipxroute
<ipxNet> <metric> <ticks>
<remoteName>
IPX SAPs Add Enter appropriate
info
remote addipxsap
<servicename> <ipxNet>
< ipxNode> <socket> <type> <hops> <remote-
Name>
WAN Network Num-
ber
Enter appropriate
info
remote setipxaddr
<ipxNet> <remoteName>
IP and IPX Routing
TCP/IP Routing
(Internet Firewall)
Must be disabled
(optional)
eth ip enable
eth ip firewall
<on | off>