Product specifications

Efficient Networks
®
Router family
Technical Reference Guide
Chapter 3: Installation and Setup
Efficient Networks
®
Page 3-47
Link Protocol/DLCI
b
(for Frame Relay
routers)
Select: PPP
Enter: DLCI num-
ber
remote setprotocol ppp <remotename>
remote setdlci <number> <remoteName>
Bridging On/Off Must be off
remote disbridge <remoteName>
TCP/IP Route Ad-
dress
Enter: Explicit or
default route
remote addiproute <ipnet> <ipnetmask> <hops>
<remoteName>
If NAT is enabled: To enable NAT,
use:
remote setiptranslate on <remoteName>
TCP/IP Route Ad-
dresses
Enter: Source
WAN Port Address
remote setsrcipaddr <ipaddr> <mask> <remote-
Name>
If NAT is not en-
abled:
You may still need to
enter a Source
WAN Port Address
remote setsrcipaddr
<ipaddr> <mask> <remote-
Name>
IP and IPX Routing
TCP/IP Routing
(Internet Firewall)
Must be enabled
(optional)
eth ip enable
eth ip firewall <on | off>
IPX Routing Must be disabled
eth ipx disable
Store
Reboot
save
reboot
a
Enter this information if you are using RFC 1483 in an ATM environment.
b
Enter this information if you are using RFC 1490 in a Frame Relay environment.
Table 3-5: RFC 1483 / RFC 1490 with IP Routing (Cont.)
Steps Settings Commands