Product specifications

Chapter 3: Installation and Setup Efficient Networks
®
Router family
Technical Reference Guide
Page 3-44 Efficient Networks
®
Remote Routers
New Entry Enter: Remote
Name
remote add
<remoteName>
Link Protocol/PVC
a
(for ATM routers)
Select: PPP
Enter: VPI/VCI num-
bers
remote setprotocol
ppp <remoteName>
remote setpvc <vpi number>*<vci number> <re-
moteName>
Link Protocol/DLCI
b
(for Frame Relay rout-
ers)
Select: PPP
Enter: DLCI number
remote setprotocol
ppp <remoteName>
remote setdlci <number> <remoteName>
Security
c
Remote’s Password
Choose security lev-
el
Enter: password
remote setauthen
<protocol> <remoteName>
remote setourpasswd <password> <remote-
Name>
Bridging On/Off Must be off
remote disbridge
<remoteName>
Add IPX Routes Enter appropriate
info
remote addipxroute
<ipxNet> <metric> <ticks>
<remoteName>
Add IPX SAPs Enter appropriate
info
remote setipxaddr
<ipxNet> <remoteName>
WAN Network # Enter appropriate
info
remote setipxaddr
<ipxNet> <remoteName>
IP and IPX Routing
TCP/IP Routing Must be disabled
eth ip disable
IPX Routing Must be enabled
eth ipx enable
Store
Reboot
save
reboot
a
Enter this information if you are using PPP in an ATM environment.
b
Enter this information if you are using PPP in a Frame Relay environment.
c
If the ISP does not support the authentication of the ISP system by the caller, use the command
remote disauthen <remoteName> to disable the authentication.
Table 3-3: PPP with IPX Routing (Cont.)
Steps Settings Commands